008615129504491

head_banner

18 Years Factory AMS 4911 Titanium sheet - Titanium alloy Gr5 plate for medical equipment – Xinnuo

Short Description:


Product Detail

Product Tags

Related Video

Feedback (2)

We've got a really efficient group to deal with inquiries from prospects. Our purpose is "100% customer fulfillment by our product excellent, price & our group service" and enjoy a superb track record amid clientele. With many factories, we can easily deliver a wide selection of Pure Titanium Bar, Medical Titanium Plate, ISO 5832-2 Titanium sheet, We welcome customers, business associations and friends from all parts of the world to contact us and seek cooperation for mutual benefits.
18 Years Factory AMS 4911 Titanium sheet - Titanium alloy Gr5 plate for medical equipment – Xinnuo Detail:

Features

Material Gr 5, Gr 5 ELI, Ti-6Al-4V ELI
Standard ASTM F136, IS05832-3
Size (1.0~12.0) T * (300~1000) W * (1000~2000 )L mm
Tolerance 0.05-0.2mm
State M, Annealed
Surface Condition Polished, Customized surface
Roughness Ra<3.2 um

Product Inspection Details as following

100% Surface defect detection .
This part of the inspection surface is the first process in the inspection department. The bar is constantly rotated to check if there are any defects such as cracks and dents that can be found on the surface. If there are defects, they are marked and then recorded in the defective inventory.

100% Infrared diameter instrument Accurate diameter measurement and strict tolerance control.
The detailed inspection steps as follows:
1. Before starting the inspection, the inspection technician follows up on the required range of tolerances and sets warning values.
2. To start the inspection, every bar is rotated evenly through the inspection area and the detected diameter data is displayed on the instrument.
3. When there is an over or under diameter, the inspection instrument alerts and the bar is disposed of as scrap or polished twice to reduce the diameter.

100% Straightness inspection.
Straightness tolerance is the degree of deviation of each point on the line from the line, offered straightness 0.3‰-0.5‰. The detailed processing is put a rod on the surface of a well-lit platform, the rod rolls back and forth, the inspector looks in front and uses a 0.2mm ruler to detect the gap between the rod and the platform.

100% Eddy Current Flaw Detection.
The coil in which the inspected product is placed inside the coil for inspection is suitable for the detection of bars and wires with a diameter of 3-14 mm. Since the magnetic field generated by the coil acts first on the outer wall of the specimen, the effect of detecting outer wall defects is better, and the detection of inner wall defects is carried out by the use of penetration, and there is no damage to the surface and performance of the product.

100% Ultrasonic Inspection.
Mainly detect the metallurgical defects inside the product according to AMS 2631. The product is placed in a sink, and the instrument is used to test the product back and forth on the surface while it is rotating, and the instrument is observed to display the device, and if the peak value suddenly becomes higher, then the product is not homogeneous internally

Microstructure and physical properties testing

Physical properties testing including Tensile Strength, Yield Strength, Elongation A in 4D or 4W min, Reduction of Area B min. Microstructure. A1-A5,Internal structures were observed under high and low magnification microscopes for microstructure grading. Quality certificates and third-party test reports will be provided upon request

Our company specializes in producing titanium products. The material has low density but high good properties, it is widely used for medical industry. And considerably applied in medical fields:joint , tooth treating, medical implantation materials, surgical instrument, etc. Feel free to contact us with any questions!


Product detail pictures:

18 Years Factory AMS 4911 Titanium sheet - Titanium alloy Gr5 plate for medical equipment – Xinnuo detail pictures

18 Years Factory AMS 4911 Titanium sheet - Titanium alloy Gr5 plate for medical equipment – Xinnuo detail pictures


Related Product Guide:

Sticking to the perception of "Creating products of top of the range and earning mates with people today from all over the world", we constantly put the desire of consumers in the first place for 18 Years Factory AMS 4911 Titanium sheet - Titanium alloy Gr5 plate for medical equipment – Xinnuo , The product will supply to all over the world, such as: Bhutan, Greenland, Jamaica, Our factory covers an area of 12,000 square meters, and has a staff of 200 people, among which there are 5 technical executives. We are specialized in producing.We have rich experience in export. Welcome to contact us and your enquiry will be replied as soon as possible.
  • The customer service staff is very patient and has a positive and progressive attitude to our interest, so that we can have a comprehensive understanding of the product and finally we reached an agreement, thanks!
    5 Stars By Madeline from Manila - 2018.06.03 10:17
    This manufacturer can keep improving and perfecting products and service, it is in line with the rules of market competition, a competitive company.
    5 Stars By Raymond from Kuala Lumpur - 2018.12.10 19:03
    Write your message here and send it to us
    Chatting Online